| Technical Specifications | Unit | YD - 250RX1 |
| INPUT | ||
| Input Supply | ||
| Voltage | Volts . | 415 , + 15 % , -20 % |
| Phase / Freq . | No./Hz | 3ph / 50-60 |
| Max . Input KVA @ 415Vac | ||
| @ 60 % Duty Cycle | KVA / KW | 8 / 7.7 |
| @ 100 % Duty Cycle | KVA / KW | |
| OUTPUT | ||
| Rated Current Range | Amps | 50-250 |
| Rated Output Range | Volts | 12-26.5 |
| Welding Current ( 40 ° C ) | ||
| @ 60 % Duty Cycle | Amps | 250 |
| @ 100 % Duty Cycle | Amps | 193 |
| GENERAL | ||
| Power Control Method | IGBT Inverter Controlled | |
| Digital Display | 4 Digit - 7 segment LED Display | |
| Wave from Control | Digitally Controlled Waveform | |
| Welding Sequence | a . Main welding b . Main welding - crater ( Crater repeat is available ) | |
| Ingress Protection | Class | IP 21S |
| Insulation | Type | H |
| Cooling | Forced air cooling | |
| Power Factor | Degree C | > 0.9 |
| Operating Temperature | -10 to 50 | |
| Dimensions ( LxBxH ) | mm | 545x380x570 |
| Weight | Kg | 44 |
| WIRE FEEDER | ||
| Rated Welding Current | Amps | 250 |
| Applicable wire diameter | mm | 0.8 , 1.0 |
| Cable Length | Meter | 1.8 m ( gas hose 4.8m ) |
| Weight | Kg | 10 |
| Wire Feed Speed | Meter / Minute | 5-20.1 |
| Duty Cycle | % | 60 |
| Wire feeder available | in standard lenghts of 1.8 mtrs , 5 | |
| WELDING TORCH | ||
| Rated welding current | Amps | 350 |
| 350 Amps , 60 % ( COâ‚‚ ) | ||
| Duty Cycle | 10 Min . Cycle | 350 Amps , 35 % ( CO , + Ar ) |
| Continuous | 270 Amps , 100 % ( COâ‚‚ ) | |
| Continuous | 200 Amps , 100 % ( COâ‚‚ + Ar ) | |
| Applicable Wire Diameter | mm | 0.8 , 1.0 , 1.2 |
| Cable Length | Meter | 3 |
| Weight ( Incl . Cable ) | Kg | 2.8 |
| ORDERING INFORMATION | ||
| Power Source | - | YD - 250RX1DJE |
| Wire Feeder | - | YW - 25KB3DTE |
| Welding Torch | - | YT - 35CS4DAF |
| Remote Management Controller | ||
| FOR STAINLESS STEEL MIG / MAG WELDING FOLLOWING CONFIGURATION | ||
| Power Source | YD - 250RX1DJS - Stainless steel welding model , 0.8 mm / 1.0 mm dia wire Solid SS wire & Solid MS wire | |
| Wire Feeder | YW - 25KB3DTE | |
| Welding Torch | YT - 35CS4DAF | |
Panasonic; MIG/MAG Welding Machines; YD-250RX1
Key Features of Key YD – 250RX
- Inverter-based digital wave control GMAW and FCAW welding
- Higher efficiency and higher power factor results in greater
power saving. - Designed to work even under high ambient temperatures up
to 50° - Lightweight and compact MIG/MAG/FCAW welding outfit.
- Unique design of three layer and four room dust-free
- RX1 Series is manufactured as per Std. IEC 60974-1:2000/GB
1:2004. - Fresh tip treatment and burn-back time control are
- Works on 50/60 Hz frequency in power supply.
- Equipped with Synergic Mode (Unitary Function) in which
welding voltage is set based on the welding current value
The voltage can be adjusted finely to fit the best current values. - Digitally controlled waveform enables superior arc
Additional information
| Brand | |
|---|---|
| Category | |
| Sub Category | MIG/MAG Welding Machines |
Related products
Why Choose Cross Marketing?
Cross Marketing, estd. 1995, are leading distributors and exporters of the best quality of Welding, Cutting, Bevelling, Grinding, Safety Products, committed to serving customers spread with 18+ global brands, and over 3,000 unique Welding Consumable, Equipment, Automation and related Accessories.
With a prompt customer support team and personalized customer service, we are ready to serve your requirements for Industrial Products, and Industry 4.0 Solutions.