Packaging data
| φ mm | Spool | Drum | |||
| 1.2 | 12.5kg | 15kg | 20kg | 250kg | - |
| 1.4 | - | 15kg | 20kg | 250kg | 350kf |
| 1.6 | - | 15kg | 20kg | - | 350kg |
| Volume mm | 300W, 110H, 300L | 530φ, 820H | 680φ, 770H | ||
Composition (all-weld metal mass %)
| Typical | Guarantya | |
| C | 0.05 | 0.12 |
| Si | 0.45 | 0.90 |
| Mn | 1.35 | 1.75 |
| P | 0.01 | 0.03 |
| S | 0.01 | 0.03 |
| Ni | 0.01 | 0.50 |
| Cr | 0.02 | 0.20 |
| Mo | 0.01 | 0.30 |
| V | 0.01 | 0.80 |
| Cu | 0.02 | 0.35 |
| Note: aSingle values are maximium. | ||
Welding parameters (A)
| φ mm | 1F, 1G, 2F | 2G | 3G uphill, 4G | 3G downhill |
| 1.2 | 120-300 | 120-280 | 120-260 | 200-300 |
| 1.4 | 160-350 | 160-320 | 160-270 | 220-300 |
| 1.6 | 200-400 | 200-350 | 200-280 | 250-300 |
All-weld mechanical properties
| Typical | Guaranty | |
| 0.2%YS (MPa) | 510 | 400min. |
| TS (MPa) | 570 | 490-655 |
| EI on 4d (%) | 30 | 22min. |
| IV -18°C (J) | 85 | 27min. |
Approvals / Click here for certificates
| ABS | 2YSA, 2Y400SA, H10 |
| LR | 2YS, 2YM H10 |
| DNV | ⅡYMS,ⅡY40MS,H10 |
| BV | SA2M, SA2YM, SA2Y40M H10 |
| NK | KSW52Y40G (C) H10 |
| CR | 2YS-HH |
| KR | 2YSG (C) |
| CCS | 2SH10, 2YSH10 |
